- Type: Magnetic
- Single-Ended or Differential
- U/V/W Commutation Output
- With or Without Index
- Open-Collector or Line Driver
- Resolution: 100-2048 CPR
- Required Voltage: +5VDC
- Bore Diameters: .125"-.500"
- IP40 Protection Level
- Type: Magnetic
- Single-Ended or Differential
- U/V/W Commutation Output
- With Index or Without Index
- Open-Collector or Line Driver
- High Resolution
- Resolution: 1250-8192 CPR
- Required Voltage: +5VDC
- Bore Diameters: .125"-.500"
- IP40 Protection Level
- Type: Magnetic
- Single-Ended or Differential
- With or Without Index
- Push-Pull or Line Driver
- Resolution: 20-10000 CPR
- Required Voltage: +5VDC-30VDC
- Bore Diameters: .236"-.591"
- IP65 Protection Level
- Type: Linear
- Read Head and Magnetic Scale
- Resolutions: 5, 10, 25, and 50µm
- Linear Travel Speed: Up to 16m/s
- Hi-Flex Sensor Cable up to 50m
- IP67 Protection Rating
- Push-Pull or Line Driver
- Pole Pitch:5mm
- Accuracy Class of ±8µm/m, ±35µm/m, or ±85µm/m
- Type: Magnetic
- High accuracy–less than 10 arc minutes
- No moving parts
- Sensor gap is highly resistant to liquid or solid
- Customize to fit new designs
- 0.9 inch diameter
- Type: Magnetic
- High accuracy–less than 10 arc minutes
- Compact, low-cost, rugged
- Sensor gap is highly resistant to liquid or solid
- No moving parts
- Customize to fit new designs
- 1.1 inch diameter
- Type: Magnetic
- Absolute Encoders
- Analog Output: 4-20mA,0-5V, 0-10V
- Output Range of 180° or 360°
- Shaft Diameter: 6mm
- Resolution 8-Bit Clockwise
- Power Supply: +10VDC +30VDC or +15VDC +30VDC
- IP65 and IP66 Protection Level
- Type: Magnetic
- Differential
- Freely Programmable Index
- Voltage 5VDC or 10-30VDC
- Resolution 1-65536 PPR
- Push Pull, Line Driver
- Shaft Diameter: 0.236” – 0.472”
- IP65 Protection Level
- Type: Magnetic
- Differential
- Index Length 90 or 180° el.
- Resolution 1-16384 PPR
- Push-Pull, Line Driver
- Required Voltage: +5VDC – 30VDC
- Shaft Diameter: 0.236” – 0.472”
- IP65 Protection Level
- Type: Magnetic
- Absolute Magnetic Kit
- 10-Bit Analog – 2.6 kHz, 10-Bit PWM – 1024 PPR – 1 kHz, or 12-Bit PWM 4096 PPR – 250 Hz, Outputs
- Fits Shaft Diameters from 0.125” to 0.250”
- Mounts onto 0.750”, 1.280”, and 1.812” Bolt Circles
- Accepts ±0.025” Axial Shaft Play
- Type: Magnetic
- Absolute Magnetic Kit Encoder
- Mounts onto 0.750”, 0.812”, 0.823” and 1.812” Bolt Circles
- No Battery & No Maintenance
- Electrical Resolution: Up to 17 Bit Resolution
- Multiturn Range: Up to 16 Bit Resolution
|
|