Brushless DC Driver -
MDC050-050051
- Open Loop Operation
- 1.5V to 4V External Voltage Speed Control
- 2-Quadrant Operation
- Hall Sensor Feedback
- Short Circuit Protection
- Maximum Current Limit Setting up to 5.0 Amps
- Run / Stop, Freewheel and Direction Inputs
- TTL-CMOS Compatible Inputs
- Compact Size
- Screw Type Terminal Block
The MDC050-050051 driver is designed to drive DC brushless
motors at currents of up to 5A and 50V. The driver operates in the
basic open loop configuration with either 60º or 120º DC brushless
motors. The driver is protected against over current
(cycle-by-cycle), hall sensor error and under voltage. When an error
occurs, a fault light is turned on to notify the user. Included on
the driver is an internal potentiometer to control the maximum phase
current allowed into the motor and an internal potentiometer to
control the speed of the motor. An optional external voltage
(1.5-4VDC) can be used to control the speed as well. The direction
of the motor can be preset by the direction control input. Other
inputs to the drive include a run/ stop and a motor freewheel input.
The freewheel input overrides all other inputs into the driver.
| MDC050-050051 | $84.00 | DC | 20 - 50VDC | 150 | 5 |