Integrated Brushless DC Motors

PRODUCTS

Integrated Brushless DC Motors - BLY17MDA

- Constant Velocity Mode
- 0V to 5V External Voltage Speed Control
- 2-Quadrant Operation
- Hall Sensor Feedback
- Short Circuit Protection
- Maximum Current Limit Setting at 3.0 Amps
- Speed Out
- Run / Stop, Freewheel and Direction Inputs
- TTL-CMOS Compatible Inputs
- Compact Size
- Screw type Terminal Block

User's Guide

Printable Spec Sheet

Integrated Brushless DC Motors - BLY17MDA

The BLY17MDA Series is a compact construction that implements a DC Brushless controller and a DC Brushless motor in one streamline package. With the two parts combined into one casing, the need to wire up the motor has been eliminated. The high-speed DC Brushless motor can operate at 4000RPM and can generate up to 10 oz-in of torque. The DC Brushless controller operates off 24VDC with a maximum power intake of 50W. Using hall sensor feedback, the DC Brushless controller operates in a constant velocity mode. The driver is protected against over current (cycle-by-cycle), hall sensor error and under voltage. An external potentiometer (10K) or external voltage (0-5VDC) can be used to control the speed. The direction of the motor can be preset by the direction control input. Other inputs to the drive include a Run / Stop and a Freewheel input. When using the Freewheel input, it overrides all other inputs into the driver.

Specification

*Note: Other Speed Options, Custom lead wires, cables, connectors, and windings are available upon request.

Model #	Single Unit Price (USD)	# of Poles	Rated Voltage (V)	Rated Current (A)	Rated Torque (oz-in)	Rated Speed (RPM)	Rated Power (Watt)	No Load Speed (RPM)	No Load Current (A)	Inertia (oz-in-sec^2)	Weight (lbs)	Motor Length (in)
BLY17MDA1S-24V-4000	$116.00	8	24		8.9	4000	26	6200		0.00016	1	2.83
BLY17MDA2S-24V-4000	$133.00	8	24		17.8	4000	52	6200		0.00032	1.4	2.83

Dimension

Wiring Information

Integrated Brushless DC Motors - BLY17MDA Hookup Specs

Integrated Brushless DC Motors - BLY17MDA Hookup Diagram