| |
The
MDC151-012301 driver is designed to drive DC brushless motors at
currents of up to 30A and 15V. Using hall sensor feedback, a
constant velocity mode can be selected. The driver is protected
against over current (cycle-by-cycle or latched), hall sensor
error and under voltage. When an error occurs, a fault light and
a fault output are turned on to notify the user. Included on the
driver is an internal potentiometer to control the maximum phase
current allowed into the motor and an internal potentiometer to
control the speed of the motor. An external voltage (0-5VDC) can
be used to control the speed as well. The direction of the motor
can be preset by the direction control input.
Other inputs to the drive include a run/stop and a motor
freewheel input. When using the run/stop input, there are three
ramp up/down profiles from standstill to select from. The
run/stop input overrides all other inputs into the driver. |
|