|
|
- Line Powered - No Additional Power Supply
Needed
- 8 Amps/Phase Output Current
- Microstepping Driver Operations
- 1, 2, 5, 8, 10, 16, 32, and 64 Step
Operations
- Opto Isolated Inputs
- Short Circuit Protection
- Motor On/Off Input
- Current Reduction
- Over Temperature and Over Voltage Protection
|
|
Product Information |
| The
MLP08641 Line Powered Microstep Driver has an output
current capability of 1.5 Amps minimum to 8.0 Amps
maximum (Peak Rating). The MLP08641 driver operates
with either an AC voltage of 20-130 Volts or a DC
voltage of 30-185 Volts. The inputs are opto-isolated
with a minimum sourcing of 7 mA per input (5VDC
Minimum to 24VDC Maximum). The clock input is set to
receive either positive or negative edge clocks with
a maximum frequency of 400K Hz. The direction input
is current sourcing for CW and no current for CCW.
The ON/OFF feature is current sourcing to
de-energize the step motor and no current to
energize the motor. Reduce Current Enabled
automatically reduces motor current 70% after last
step (1 sec delay). The driver has built-on features
to indicate power on (Green LED), clocks being
received (Yellow LED), and fault conditions (Red
LED). Protection devices have been added to this
driver for short-circuits, motor mis-wire
conditions, over-voltages and over-temperature. |
!
Click here for MLP08641 Addendum
|