The MBDC020-024031 driver is designed to drive DC Brush motors at currents of up to 3A (peak) and 24V. The driver operates in the basic open loop configuration. The driver is protected against over current (cycle-by-cyle) and under voltage. When an error occurs, a fault output is turned on to notify the user. An external voltage (0.75-4VDC) is used to control the speed of the motor. The direction of the motor can be preset by the direction control input. The freewheel input overrides all other inputs into the driver. With two connector arrays arranged in a 2.54 mm pattern, it allows easy integration and connectivity to the MDC020-EVALBOARD or the OEM-side mother board.