EDC-08 - EDC
  • 187-242VAC Single Phase Input
  • 750 Watt Power Rating
  • Requires a 2,500 P/R Encoder Input
  • Enclosed and Self-Cooled
  • Real-Time Monitoring and Management
  • ESView Communication Software
    • Parameter Management
    • I/O Signal Monitoring
    • Torque and Speed Analysis
    • Gain Adjustments
  • RS232 Interface
  • MODBUS and CANopen Communication
  • Position and Speed Control
  • 4 Inputs, 4 Outputs
  • Optional Handheld Device
  • Electronic Gearing
AC Servo Drives - EDC

Anaheim Automation's EDC-08 Series Servo Drive is a great fit for position control requirements. It was designed to switch dynamically among the different control modes for a more convenient and flexible operation. These AC Servo Drives have been updated with a control mode switch function, to effectively reduce overshoot and adjustment time by setting the appropriate switch functions. The EDC-08 Series can operate in position control mode, speed control mode, and contact position control mode. In position control mode, position and speed are controlled using clock + direction signals sent by the host controller to the servo drive. In this mode, an electronic gearing ratio can be set. Electronic gearing is a relationship between encoder pulses and reference pulses sent to the servo drive. In speed control mode, the servo drive is able to run according to an internal set speed as well as provide the user with an acceleration and deceleration profile. In contact position control mode, the servo drive offers the user a total of eight preset position, speed, acceleration, deceleration, and stop time profiles to move from point to point in their application. These control features offer users the ability to customize these drives for their application needs. The EDC-08 Series AC Servo Drive operates from a single-phase input voltage range from 187 to 242VAC with a continuous output power rating of 750 Watts.

Note: The EDC Servo Drives are limited to stock on hand. For a more permanent solution, refer to the PRONET-E Servo Drives .

Item Rated
Power
(Watts)
Rated
Voltage
Drive
Control
Capabilities
COMM I/O
Signals
Price
(USD)
Quantity
Discounts
Stock
Status
Add To
Cart
EDC-08APE 750 187-242VAC Position,
Speed
MODBUS
CANopen
4 Inputs
4 Outputs
$430.00 view here
Quantity Discounts
1pc. $430.00
10pc. $414.95
25pc. $401.78
50pc. $389.42
100pc. $377.79
Contact Us for Quantities over 100
1 in Stock Add to Cart
  • EDC-08 Driver Dimensions
  • Main Circuit Diagram
  • I/O Signal Connection
  • 1CN Connector Pinout
AC Servo Drives - EDC Dimension 1
AC Servo Drives - EDC wiring
AC Servo Drives - EDC Torque Curves 1
EDC-08 Driver Dimensions
AC Servo Drives - EDC Dimension 1
Main Circuit Diagram
AC Servo Drives - EDC wiring
I/O Signal Connection
AC Servo Drives - EDC Torque Curves 1
1CN Connector Pinout
© 2017 Anaheim Automation, Inc. - All Rights Reserved