Pulse Generators

 

Text Box: Text Box: TM2000 - Universal Oscillator The TM2000 is a linear ramping pulse generator and Joystick Controller designed to be used with Anaheim Automation Step Motor Drivers. It has many input options including 4 on-board speed pots (2 Base speeds and 2 Max speeds), a remote pot input, a 0-10VDC VCO input, a -5VDC to +5VDC VCO input, and a joystick input. Three select lines determine which input option is used. Using the three select lines, the user can switch from one mode to another. The joystick input and -5VDC to +5VDC VCO input have automatic start-stop and direction control. This pulse generator is capable of producing pulse rates up to 2.5MHz. A 16-position rotary switch can be used to divide the normal output clock by 2 to 65536......(continue) Text Box: Text Box: JSC2002 - Joystick Controller 2-Axis The JSC2002 is a two-axis joystick controller designed to be used with Anaheim Automation Step Motor Drivers. The JSC2002 is ideal for X-Y applications that require manual positioning. CLOCK and DIRECTION signals for two axes of step motor drivers are produced by the JSC2002. The speed or frequency of the CLOCK pulses is determined by the displacement of the joystick; as the stick is moved further from the center position, the frequency increases. When the joystick is in the center position, no pulses are created. Pulses begin when the joystick is moved just enough to overcome a small threshold. The maximum output frequency of the CLOCK pulses is 2.5 MHz which allows the JSC2002 to ......(continue) Text Box: Text Box: MBC25P22 - Programmable Pulse Generator with Integrated Driver Anaheim Automation has developed a step motor driver specifically for the feed-conveyor industry, where high motor speed and precise synchronization is required. Anaheim Automation’s engineers have incorporated additional circuitry to eliminate the load-sharing issues that typically slowed down motors. This design enables the motors to be run at 50% higher speeds than our ealier designs with no additional cost. Unlike other pulse generators with potentiometer settings, two different speed profiles can be programmed with exact speeds on the MBC25P22. Additionally, the MBC25P22 includes two 2.5A drivers, an analog potentiometer input for maximum speed, two ramp down modes, an input to select speed profiles, a Run....(continue) Text Box: Text Box: MBC25P11 - Programmable Pulse Generator with Integrated Driver Anaheim Automation introduces its latest advancement in pulse generator/driver technology, the MBC25P11. Unlike other pulse generators with potentiometer settings, the MBC25P11 can be programmed, with exact speeds. It was specially designed for applications requiring step motors to sync up at precise acceleration, deceleration, and speed. Not only one speed, but up to four different speeds can be programmed. Additionally, the MBC25P11 includes a 2.5A driver (for one or two motors), inputs for hard and soft limit switches, two ramp down modes, three inputs to select speed banks, and a run/stop input. All these features are incorporated in a compact, costeffective package. Perhaps the most appreciable.....(continue) Text Box: Text Box: MBC25PG1 and MBC25PG1L - Manual Pulse Generator with Integrated Driver The MBC25PG1 microstep driver/pulse generator has an output current capability of 0.5A minimum to 2.5A maximum (peak rating). The MBC25PG1 driver operates with a DC voltage of 12VDC to 35VDC. The logic inputs can be operated from +5VDC minimum to +24VDC maximum. The MBC25PG1’s internal PG (pulse generator) is a linear ramping PG designed to be used with this driver. It has adjustable base speeds and max speeds, independent adjustments for acceleration (ramping up) and deceleration (ramping down), jumper selectable external or on-board max speed potentiometer and a jumper selectable deceleration profile.(continue) Text Box: AA2876 - Pulse Generator The AA2876 is a linear ramping pulse generator designed to be used with Anaheim Automation Stepper Motor Drivers. It has adjustable BASE and MAX speeds and independent adjustments for acceleration (ramping up) and deceleration (ramping down). The AA2876 also has a pulse output which can be set as a positive going TTL/CMOS output, a negative going TTL/CMOS output, or an open collector output. There are three modes of operation: Two-input operation, Single Input with ramping down, and Single Input with no ramping down. With the Two-input mode, the operator can run at BASE speed for as long as necessary, ramp up to MAX.......(continue) Text Box:

Text Box: Jump To Description

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Jump to Category:
Standard Step Motors | High Torque Step Motors | Spur Gear Step Motors | Permanent Magnet Step Motors
Permanent Magnet Step Gear Motors | Linear Actuator Step Motors | IP65 Rated Sealed Step Motors | Integrated Step Motor / Drivers
Bipolar Step Motor Drivers | Unipolar Step Motor Drivers | Step Motor Driver Packs | Step Motor Preset Indexers
Step Motor Programmable Controllers | BLDC Motors | BLDC Drivers | BLDC Integrated Motor / Drivers
Positioning Stages | Power Supplies | Shielded Motor Cable | Data Converters | Motor Brakes | Motor Encoders | Other Motor Adders

 

© Anaheim Automation
910 East Orangefair Lane
Anaheim, CA  92801-1195
Phone: 1-714-992-6990
Fax: 1-714-992-0471
webmaster@anaheimautomation.com