Stepper Driver Packages -
DPD72001 & DPD72002
- Bi-Level Drive Operation
- Short Circuit Protection
- Open Motor Protection
- Fault LED
- 10 Amps/Phase Operating Current
- 7 Amps/Phase Output Current
- 300 Watt Power Supply
- Unipolar Operation
- Half-Step And Full-Step Operation
- Motor On/Off Input
- Available in 110V and 220V Versions
The DPD72001 and DPD72002, One and Two Axis Stepper Driver Packs
contain Anaheim Automation's latest driver technology, which
includes protection against shorted motors or open motor
connections. These models feature 300 Watt Power Supplies and output
current capability of 10 amps peak (7 amps continuous). If either a
short or open circuit occurs, a Fault LED turns on and the driver
shuts down. Like other Anaheim Automation Step Motor Drivers, the
DPD72 Series uses a bi-level drive technique. High voltage is
applied to rapidly build up the current in the motor windings and a
low voltage is used to sustain the current. This bi-level drive
technique achieves outstanding motor performance without high
frequency switching as used in chopper drives. Therefore, there are
little or no EMI or RFI problems, and motor heating is greatly
reduced.
| DPD72001 | 1 | 1.0 - 7.0 | 200 - 400 | Driver Only | 300 |
| DPD72002 | 2 | 1.0 - 7.0 | 200 - 400 | Drivers Only | 300 |