Stepper Driver Packages - DPF72 Series
- Bilevel Drive Operation
- Short Circuit Protection
- Open Motor Protection
- Fault LED
- 10 Amps/Phase Operating Current
- 7 Amps/Phase Output Current
- 600 Watt Power Supply
- Unipolar Operation
- Half-Step And Full-Step Operation
- Motor On/Off Input
- Available with +5VDC Power Supply
Output or with Ramping Pulse Generator
The DPF72003 and DPF72004, One and Two Axis Driver Packs
contain Anaheim Automation's latest driver technology, which
includes protection against shorted motors or open motor
connections. These models feature 600 Watt Power Supplies
and output current capability of 10 amps peak (7 amps
continuous). If either a short or open circuit occurs, a
Fault LED turns on and the driver shuts down. Like other
Anaheim Automation Step Motor Drivers, the DPF72000 Series
uses a bilevel drive technique. High voltage is applied to
rapidly build up the current in the motor windings and a low
voltage is used to sustain the current. This bilevel drive
technique achieves outstanding motor performance without
high frequency switching as used in chopper drives.
Therefore, there are little or no EMI or RFI problems, and
motor heating is greatly reduced.
| DPF72002 | 2 | 1.0 - 7.0 | 200 - 400 | Drivers Only | 600 |
| DPF72002XCE | 2 | 1.0 - 7.0 | 200 - 400 | Drivers Only | 600 |
| DPF72003 | 3 | 1.0 - 7.0 | 200 - 400 | Drivers Only | 600 |
| DPF72003XCE | 3 | 1.0 - 7.0 | 200 - 400 | Drivers Only | 600 |
| DPF72004 | 4 | 1.0 - 7.0 | 200 - 400 | Drivers Only | 600 |
| DPF72004XCE | 4 | 1.0 - 7.0 | 200 - 400 | Drivers Only | 600 |