.PNG){kind=spacer}
- Enhanced Torque/Speed Output over 24VDC drives
- Improved Start-Stop Speeds
- 1.0-4.5 Amps/Phase Operating Current
- Short Circuit Protection
- Open Motor Wire Detection
- No RFI or EMI Problems
- Requires 24-40VDC
- TTL-CMOS Compatible Inputs
- Receives Positive or Negative Going Clocks
- Full Step or Half Step Operation
- Motor Turn Off Provisions
- Enclosed Modular Package
- RoHS Compliant
.png "Stepper Drivers with DC Input - MBD45021-75")
The MBD45021-75 is a bilevel step
motor driver specifically designed to dynamically
enhance driver performance.
The driver requires 24 to 40 volts DC to
operate with this drive. The drive will
out perform all standard 24VDC drivers
in the industry. If your system is designed
for a 24VDC specification, this
driver will allow your motor to increase
its operating output performance thanks
to this outstanding new driver design! A power supply is required and must be purchased seperately.
See Accessories on this website for driver adders, such as shielded motor cables, connectors, and power supply options. For compatible high-torque stepper motors, consider our popular 23Y and 34Y series. For standard torque (round-bodied motors), see 23W and 34W series.
| Item | Current Range (A) |
Voltage Requirement |
Steps per Revolution |
Pulse Generator/Controller |
Power Supply |
Price (USD) |
$AVE Quantity Discounts |
Stock Status | Add To Cart | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MBD45021-75 | 1.0 - 4.5 | 24 - 40 VDC | 200 , 400 | - | PSA40V4A | $224.00 |
view here
|
33 in Stock |
|
||||||||||||||
- Dimensions
- Wiring Diagram
- Torque Curves
- Specifications
- Ordering Information
.png "Stepper Drivers - MBD45021-75 Dimension")
.png "Stepper Drivers - MBD45021-75 Wiring")
.png "Stepper Drivers - MBD45021-75 Torque Curves")
.png "Stepper Drivers - MBD45021-75 Specifications")
.png "Stepper Drivers - MBD45021-75 Ordering")