AC Products
Anaheim Automation's AC Motor products are separated into four different AC Motor types: AC Induction Motors, AC Industrial Motors, AC Induction Gearmotors, and AC Synchronous Gearmotors. These AC Motor types run when connected to AC Power. Each type of AC Motor that Anaheim Automation offers is priced very competitively. The AC Motor product line is developed with cost savings in mind without sacrificing quality. Many of the AC Motor products are in stock and can be shipped out the day following your order placement. The AC Motor line can provide torque from 5 to 600 oz-in (model dependent). Note: Specials and customization are available; however, a minimum purchase may be required. Contact Anaheim Automation's Sales Department for details.
- Torque: 5.38 to 122 Ounce-Inches
- Sizes: Sixteen Series from 60mm to 100mm
- Round-Bodied with Square Mounting Flange
- Self Starting
- Reversible
- Huge Selection, Low-Cost AC Induction Motors
- Customization for Specific Requirements Available
- Shaft Modifications and Motor Adders Available
- Torque: 42 to 1,699 Ounce-Inches
- Sizes: From 2.3 to 6.14 Inches Across Flange
- Low-Cost AC Synchronous Motors
- Round-Bodied with Square Mounting Flange
- Comes with Matching Capacitor and Resistor
- Customization for Specific Requirements Available
- Shaft Modifications and Motor Adders Available
- Rated Torque: 170 to 600 Ounce-Inches
- IEC Frame Sizes: 63, 71 and 80
- 200W to 750W Motor Capacity
- 3 Phrase Operation at 220VAC OR 380VAC
- All Motors are rated IP55
- Lower Heat Generation compared to Competitors; Increased life time
- Flange Mount or Foot (leg) mount options available
- Output shaft's oil seal prevents dust and water damage
|
- Torque: 16 to 5,664 Ounce-Inches
- Sizes: 60mm to 100mm
- Low-Cost AC Motors with Spur Gearboxes
- Round-Bodied with Square Mounting Flange
- Customization for Specific Requirements Available
- Shaft Modifications and Motor Adders Available
- Reversible
- Torque: Up to 56 Ounce-Inches at 30rpm
- Sizes: 44mm and 50mm
- Low-Cost AC Synchronous Gearmotors
- Round-bodied with Square Mounting Flange
- Frequently Used in Appliances, Displays, Printers, Timers, Pumps, etc.
- Customization for Optimizing Current, Voltage, Torque and Max Speed
- Shaft Modifications and Motor Adders Available
- Torque: 708 oz-in to 27,614 oz-in
- Power: 200Watts to 750Watts
- Gear Ratios from 5:1 to 200:1
- Shaft Diameters from 18mm to 40mm
- Foot and Flange-Mount Options Available
- Low-Cost AC Industrial Gearmotors
- Compact Size, High Efficiency
- IP55 Protection
- Class F Insulation
|
- Input Range: 110VAC or 220VAC
- Max Power: 25W to 200 Watts
- Closed Loop Operation Available
- RPM Display Available
- Simple, Cost-Effective Design
- Small package designs
- Covers a wide range of motor applications
- Customization Is Available
- Input Range: 230 or 460VAC
- Max Power: 1 to 536 Horsepower
- Open-Loop Speed Control
- Detachable LCD Keypad Offers a User-Friendly Operation Interface
- Advanced Network Functions Built-In: RS485, BACnet and MODBUS
- Modular Design for Flexible Extension and Ease-of-Maintenance
- Greatly Improve Efficiency of Variable Torque and Constant Horsepower Load Applications
- Excellent for Fan and Pump Applications
|