HMI Tutorials
- HMI Hello World
-
This video demonstrates how to create a Hello World program on an HMI. This tutorial will walk you through the steps of creating a new frame, writing text to the frame, and displaying the frame. This example will show you the basics of handling and managing windows and frames.
- HMI:Send ASCII Commands to Controller
-
This video demonstrates how to create a program on an HMI which will send ASCII commands to a controller. This tutorial will walk you through the steps of formatting your text, storing your text and how to send your text from the HMI to the controller. With this simple tutorial you can easily export the ASCII commands specific to your controller.
- Adding Your Logo to an HMI
-
This video demonstrates how to add your own logo to an HMI on Start Up. This tutorial will walk you through the steps of importing a new logo and displaying it at start up.
- Creating One Button for Two Commands
-
This video demonstrates how to send two commands to a controller from a single HMI button using a Bit State Setting, Macro's and a PLC Control component. This demonstration introduces you to the PLC Control component which has several different usages, using one bit register to perform multiple operations is just one.
- How to Connect USB to Serial Cable
-
How to set up, find drivers, and select the proper settings to connect a USB to RS232C serial cable, to an Autonics LP/GP.
- Creating I/O and Lamps with Autonics GP Editor
-
How to create a simple ladder logic program in Smart Studio, and properly display the I/O status with lamps in GP Editor.
- Autonics Smart Studio Uploading and Monitoring
-
How to upload a ladder logic program from an Autonics LP to Smart Studio, and monitor the program's status in real-time.
- Autonics GP Editor Upload
-
How to upload screens from an Autonics LP/GP, to GP Editor
- Introduction to HMI Bit Control Components
-
An overview of basic components in the EV5000 editing software, such as bit state lamp, bit state setting and bit state switch.