$66
  • Type: Magnetic
  • Single-Ended or Differential
  • U/V/W Commutation Output
  • With or Without Index
  • Open-Collector or Line Driver
  • Resolution: 100-2048 CPR
  • Required Voltage: +5VDC
  • Bore Diameters: .125"-.500"
  • IP40 Protection Level
$71
  • Type: Magnetic
  • Single-Ended or Differential
  • U/V/W Commutation Output
  • With Index or Without Index
  • Open-Collector or Line Driver
  • High Resolution
  • Resolution: 1250-8192 CPR
  • Required Voltage: +5VDC
  • Bore Diameters: .125"-.500"
  • IP40 Protection Level
$370
  • Type: Magnetic
  • Single-Ended or Differential
  • With or Without Index
  • Push-Pull or Line Driver
  • Resolution: 20-10000 CPR
  • Required Voltage: +5VDC-30VDC
  • Bore Diameters: .236"-.591"
  • IP65 Protection Level
$414
  • Type: Linear
  • Read Head and Magnetic Scale
  • Resolutions: 5, 10, 25, and 50µm
  • Linear Travel Speed: Up to 16m/s
  • Hi-Flex Sensor Cable up to 50m
  • IP67 Protection Rating
  • Push-Pull or Line Driver
  • Pole Pitch:5mm
  • Accuracy Class of ±8µm/m, ±35µm/m, or ±85µm/m
$48
  • Type: Magnetic
  • High accuracy–less than 10 arc minutes
  • No moving parts
  • Sensor gap is highly resistant to liquid or solid
  • Customize to fit new designs
  • 0.9 inch diameter
$53
  • Type: Magnetic
  • High accuracy–less than 10 arc minutes
  • Compact, low-cost, rugged
  • Sensor gap is highly resistant to liquid or solid
  • No moving parts
  • Customize to fit new designs
  • 1.1 inch diameter
$240
  • Type: Magnetic
  • Absolute Encoders
  • Analog Output: 4-20mA,
    0-5V, 0-10V
  • Output Range of 180° or 360°
  • Shaft Diameter: 6mm
  • Resolution 8-Bit Clockwise
  • Power Supply: +10VDC +30VDC or +15VDC +30VDC
  • IP65 and IP66 Protection Level
$229
  • Type: Magnetic
  • Differential
  • Freely Programmable Index
  • Voltage 5VDC or 10-30VDC
  • Resolution 1-65536 PPR
  • Push Pull, Line Driver
  • Shaft Diameter: 0.236” – 0.472”
  • IP65 Protection Level
$215
  • Type: Magnetic
  • Differential
  • Index Length 90 or 180° el.
  • Resolution 1-16384 PPR
  • Push-Pull, Line Driver
  • Required Voltage: +5VDC – 30VDC
  • Shaft Diameter: 0.236” – 0.472”
  • IP65 Protection Level
$50
  • Type: Magnetic
  • Absolute Magnetic Kit
  • 10-Bit Analog – 2.6 kHz, 10-Bit PWM – 1024 PPR – 1 kHz, or 12-Bit PWM 4096 PPR – 250 Hz, Outputs
  • Fits Shaft Diameters from 0.125” to 0.250”
  • Mounts onto 0.750”, 1.280”, and 1.812” Bolt Circles
  • Accepts ±0.025” Axial Shaft Play
$149
  • Type: Magnetic
  • Absolute Magnetic Kit Encoder
  • Mounts onto 0.750”, 0.812”, 0.823” and 1.812” Bolt Circles
  • No Battery & No Maintenance
  • Electrical Resolution: Up to 17 Bit Resolution
  • Multiturn Range: Up to 16 Bit Resolution