Integrated Circuit Products
To supplement our line of motors and encoders, Anaheim Automation is introducing a line of Integrated Circuit (IC) chips. Our IC chips are ideal for high volume, high performance chips at a low cost, which is a great solution for any OEM. The IC chips are 100% tested and guaranteed using advanced ATE. These IC chips are readily available in stock and ready to ship. Anaheim Automation offers IC chips for the following products: Incremental Encoder Interface, Brushless DC Motor Control, Stepper Motor Control, and AC Motor Control.
- Controls two-phase Bipolar and four-phase Unipolar motors
- Two PWM and Four Phase outputs for H-Bridge control.
- Supply Voltage: 3V to 5.5V
- Full, 1/2, 1/4, 1/8, 1/16, 1/32, step mode
- PWM chopper circuit for current control
- 8-bit PWM resolution
- Max step rate of 30k per second
- Open or closed loop control
- 3 or 4 phase operation
- OVERCURRENT SENSING disables output drivers
- Speed controlled by Pulse Width Modulation of output drivers
- HALL SENSOR inputs control output commutation sequence for electrical sensor spacings of 60°, 120°, 240°, or 300°
- Touch or Pushbutton input controls
- Up to 10 selectable speed (power) levels
- A selected speed level input becomes an output that can drive a LED to indicated the selected speed
- Operates with 50/60Hz line frequency
- Rugged, latchup-free process technology
- Interfaces Incremental Encoders to up/down Counters
- Converts Quadrature Pulses to up/down Counter Controls
- Index I/O (LSI-LS7082N)
- 4.5V to 10V Operation
- x1, x2, x4 Frequency Multiplication:
- Programmable output clock pulse width
|
- Number of Axes Control: 2, 4 or 8
- Core Voltage: 3.3V
- I/O Voltage: 5.0V or 3.3V
- Maximum Output Frequency: 5.0Mbbs (Linear) and 3.05Mbbs (S-Shaped)
- Speed and Positioning Control
- 8-bit General Purpose Input and Output
- Internal S-Shaped or Linear Acceleration/Deceleration Pulse Generator
|