The LS7290 generates Phase Drive outputs and PWM outputs for controlling two phase Bipolar motors or four phase Unipolar motors, respectively. The LS7290 contains a mode controlled look-up table for generating the motor duty cycle drive sequences. A table pointer is used which is incremented or decremented by a value determined by the operating mode and the direction control. The 8-bit PWM control and the refresh rate are set using an internal oscillator controlled by a crystal or by use of an external input clock. Peak current feedback control using pulse width modulation chopping can be used in full-step or half-step modes. The chopper consists of a voltage comparator, flip-flop and external sense resistor. The VREF voltage sets the peak current in each motor winding. Note: This series has a minimum purchase requirement of 10 pieces, regardless of stock.