Brushless Motor Commutator -
- Speed Control by Pulse Width Modulating (PWM) Only the Low-Side Drivers Reduces Switching Losses in Level Converter Circuitry for High-Voltage Motors.
- Open or Closed-Loop Motor Speed Control
- +5 to +28 Volt Operation (Vss - Vdd)
- Externally Selectable Input to Output Code for 60°, 120°, 240°, or 300° Electrical Sensor Spacing
- Three or Four-Phase Operation
- Analog Speed, Forward/Reverse, and Output Enable Control
- Positive Static Braking
- Overcurrent Sensing
- Six Outputs Drive Switching Bridge Directly
- RoHS Compliant
the LS7362C is a MOS integrated circuit designed to generate the signals necessary to control a three phase or four phase brushless DC motor. The circuit responds to changes at the SENSE inputs to provide electronic commutation of the motor windings. A positive braking feature is provided to effect rapid deceleration. The LS7362C is designed for driving Bipolar and Field Effect Transistors. Note: This series has a minimum purchase requirement of 10 pieces, regardless of stock.
Item | Gear Ratio |
Rated Torque (oz-in) |
Peak Torque (oz-in) |
No Load Speed (rpm) |
Rated Speed (rpm) |
Nominal Voltage (V) |
Rated Current (A) |
Output Power (W) |
Body Diameter (mm) |
Total Length (mm) |
Gearbox Length "L" (mm) |
Shaft Diameter (mm) |
Weight (lbs) |
Price (USD) |
$AVE Quantity Discounts |
Stock Status |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- Pin Diagram
- Pin Diagram
- Pin Diagram
- Pin Diagram
- Block Diagram
- Block Diagram
- Block Diagram
- Block Diagram
Pin Diagram
Pin Diagram
Pin Diagram
Pin Diagram
Block Diagram
Block Diagram
Block Diagram
Block Diagram